Lakhlani International
Business & Technology

Captive GCC, Build-Operate-Transfer or Outsourcing: Choosing Your India Operating Model

Once a company decides it needs engineering capacity in India, a second question arrives quickly: should it build a captive Global Capability Centre, use a partner to build and run one before handing it over, or outsource the work entirely? Each route has defensible reasons behind it. The mistake is choosing by habit, cost headline or a vendor's pitch rather than by the nature of the work.

This article sets out the three models, eight criteria for deciding between them, and how to recognise when a hybrid is the better answer. It is an analytical framework, not a verdict; the right choice depends on your facts.

The three models in plain terms

Captive GCC

The parent company owns the legal entity, hires the team directly and manages operations. It serves the parent and its affiliates. Maharashtra's GCC Policy 2025 describes eligible units in these terms and excludes BPO and call-centre operations.

Build-operate-transfer (BOT) or build-and-operate

A specialist partner establishes the centre, often operates it during ramp-up, and later transfers ownership and management to the client. Providers in the Indian market describe offerings of this kind, including build-and-operate services covering strategy, establishment and operations.

Outsourcing

A vendor delivers work from its own organisation under a commercial contract. The client does not own the team or the facility.

The boundaries blur in practice, and contractual terms matter more than the label.

Eight criteria for choosing

The comparison below summarises typical tendencies. They are analysis, not guarantees; individual cases vary widely.

How the three models compare

  • →Control of IP and know-how. Captive GCC: highest. BOT or build-operate: high after transfer. Outsourcing: lower, and depends on the contract.
  • →Speed to first delivery. Captive GCC: often slower, because of entity, leadership and hiring. BOT or build-operate: can be faster if the partner has ready processes. Outsourcing: often fastest.
  • →Management burden on the parent. Captive GCC: highest. BOT or build-operate: lower during ramp-up, rising at transfer. Outsourcing: lowest.
  • →Cost visibility over time. Captive GCC: fixed and variable costs borne directly. BOT or build-operate: partner fees plus eventual running costs. Outsourcing: vendor pricing, which may change at renewal.
  • →Flexibility to scale up and down. Captive GCC: slower to reduce. BOT or build-operate: moderate. Outsourcing: highest.
  • →Depth of integration with global teams. Captive GCC: highest. BOT or build-operate: high after transfer. Outsourcing: variable.
  • →Regulatory and data responsibility. Captive GCC: direct, with the parent. BOT or build-operate: shared during build, direct afterwards. Outsourcing: shared via contracts.
  • →Strategic ambition, such as ownership of products, AI and platforms. Captive GCC: best suited. BOT or build-operate: suited if transfer is planned. Outsourcing: less suited for core capabilities.

How to read the comparison

If the work is core to your product and you expect to grow ownership over time, control and integration weigh most. That favours a captive or a BOT route with a clear transfer.

If the work is well-defined, peripheral or time-bound, flexibility and speed weigh most. Outsourcing may be the rational choice, and building a GCC for it could be over-engineering.

If you lack local leadership and need to move quickly but want eventual ownership, BOT can bridge the gap. Test the transfer terms closely: what is transferred, when, at what cost, and who owns the knowledge and the talent relationships at that point.

Questions that expose the real constraint

  1. What will the team own in three years? Tasks or outcomes?
  2. Who will lead it? Do you have, or can you hire, credible local leadership?
  3. How sensitive is the IP or data? Consider contractual and regulatory exposure, including India's DPDP Rules, covered in the technology blueprint guide in this series.
  4. What is the time horizon? A two-year project has a different logic from a ten-year capability.
  5. How certain is your demand? Uncertain volume favours flexibility.
  6. What can the headquarters actually manage? A captive demands sustained management attention.
  7. What incentives or constraints apply? State policies carry eligibility conditions such as investment and employment thresholds and may not suit every model.
  8. What does exit look like? Know the cost of reversing the decision before committing.

Hybrid models are common

Many organisations combine approaches: a captive core for strategic engineering, with partners for peripheral workloads or surge capacity. A phased path is also possible, such as starting with a partner-led pilot and moving to a captive once demand, leadership and governance are proven. Hybrid models need clear boundaries on who owns which work, or they produce duplication and confusion.

The role of independent advice

Providers who earn fees from running a centre have an interest in the model they sell. An independent technology adviser can help assess the decision on its merits: capability mapping, build-versus-buy considerations, operating-model design and phased establishment planning are all part of Lakhlani International's GCC strategy and feasibility work. Legal, tax, HR and facilities questions stay with specialist advisers coordinated alongside it.

Technology, Product Development & GCC Setup and Scaling

Capability mapping, build-versus-buy analysis, operating-model design and phased establishment planning.

Explore the capability

Book a consultation

Pressure-test the operating-model choice against your mandate, demand certainty and leadership position.

Start a conversation

GCC setup in India: a leadership guide

The foundational guide: what a GCC is, the five decisions before hiring, and how to sequence the build.

Read the guide

Technology blueprint for a new India GCC

Capability layers, engineering organisation, security and DPDP readiness in a 12-month sequence.

Read the blueprint

Contact Lakhlani International

For help choosing between models, start with a conversation.

Go to contact

Frequently asked questions

What is the main difference between a captive GCC and outsourcing?

Ownership. In a captive GCC the parent company owns the entity and the team; in outsourcing a vendor owns and manages the team and delivers under contract. Control, integration and management burden follow from that.

What is a build-operate-transfer GCC?

A partner builds and runs the centre for an initial period, then transfers ownership and management to the client. The details vary, so transfer scope, timing, cost and knowledge ownership should be agreed explicitly.

Is a captive GCC always more expensive than outsourcing?

Not necessarily, and not always cheaper either. Costs depend on scale, utilisation, leadership and duration. Compare total cost over a realistic horizon, including management time and exit costs, rather than headline rates.

Can we start with a partner and move to a captive later?

Yes, many organisations take a phased route. Plan the transition from the start, covering people, knowledge, contracts and governance, so the move does not become a disruption.

Which model suits AI and product engineering work?

Work that is core to your product and expected to grow in ownership generally favours models that keep control and integration high. The right answer still depends on leadership availability, data sensitivity and time horizon.

Do state incentives depend on the operating model?

They can. Maharashtra's policy, for example, applies to GCC units serving the parent or affiliates and sets investment and employment thresholds. Confirm eligibility with a policy or tax adviser before assuming a benefit.

References

  • →KPMG Flash News, Maharashtra GCC Policy 2025. https://www.in.kpmg.com/taxflashnews/KPMG-Flash-News-Maharshtra-GCC-policy-2025.pdf
  • →Grant Thornton Bharat, Maharashtra GCC Policy 2025. https://www.grantthornton.in/globalassets/1.-member-firms/india/assets/pdfs/maharashtra-global-capability-centre-policy-2025.pdf
  • →Khaitan & Co, ERGO on Maharashtra GCC Policy (11 November 2025). https://www.khaitanco.com/sites/default/files/2025-11/ERGO%20-%20Maharashtra%20GCC%20Policy%20-%2011%20November%202025.pdf
  • →Autocar Professional, Primus Partners GCC build-and-operate launch. https://www.autocarpro.in/NEWS/primus-partners-expands-gcc-services-with-gurugram-hub-launches-centre-for-linde-wiemann-133482

Related articles

Business & Technology

Setting Up a BFSI or Fintech GCC in Mumbai: A Strategy Guide for Financial Services Leaders

Mayank N Lakhlani

Thinking of a BFSI or fintech Global Capability Centre in Mumbai? Compare cities, understand Maharashtra's GCC policy, and plan mandate, model and talent.

Read article→

Business & Technology

Mumbai's $300 Billion Ambition: A Business Strategy Guide for Companies in the Mumbai Metropolitan Region

Mayank N Lakhlani

How NITI Aayog's MMR roadmap and Maharashtra's GCC policy shape growth decisions for Mumbai businesses, and how to turn them into a practical strategy.

Read article→

Business & Technology

Doing Business Across Delhi NCR: A Strategy Guide for Companies Spanning Delhi, Gurugram and Noida

Mayank N Lakhlani

Delhi, Gurugram and Noida have different economic identities. Learn how to plan location, talent, funding and growth strategy across Delhi NCR.

Read article→

Business & Technology

Agentic AI in GCCs: Governed Automation That Survives Past the Pilot

Mayank N Lakhlani

India's Global Capability Centres are increasingly where enterprise AI work gets built. The Nasscom-Zinnov 2026 report puts India at about 28% of global GCC AI talent, second only to the US. That makes GCC leaders natural sponsors of agentic AI: systems that plan and take actions toward a goal rather than only answering prompts.

Read article→

Business & Technology

The Technology Blueprint for a New India GCC: Stack, Engineering Organisation, Security and DPDP Readiness

Mayank N Lakhlani

By the time a Global Capability Centre has a mandate and a location, the practical question is what to build first. Hiring engineers without a technology plan creates a centre that works hard and delivers inconsistently, with standards that differ by team and a security posture nobody has reviewed.

Read article→

Business & Technology

Why India GCCs Stall After Launch, and How to Scale Beyond Delivery

Mayank N Lakhlani

Launching a Global Capability Centre is a visible milestone. Scaling it is quieter and harder. Many centres reach a few hundred people, deliver steadily, and then stop growing in influence. They remain a place where work is done, not where decisions are made.

Read article→

Enjoyed this article?

Explore more ideas, research, and perspectives from the Knowledge Hub — or start a conversation with us.